The XLogic G Series Compressor unit is a 1U rack mounting stereo compressor.
It utilises the classic SSL G Series centre compressor design elements within a SuperAnalogue design topology. This brings the dual benefits of spectacular audio performance with a universally acclaimed compressor characteristic.
Conditions
Source impedance 50 ohms unless otherwise stated.
All measurements are RMS and are made using a 22Hz to 22kHz filter unless otherwise stated.
Noise
Input terminated with 50 ohms. Compressor switched in and Makeup set for 0dB gain.
Noise
< –90dBu
Headroom
Headroom is defined at the output level at which THD exceeds 1%.
Headroom
> +28dBu output level, 20Hz to 20kHz at 0dB gain
Dynamic Range
> 118dB
Frequency Response
Measured reference level at 1kHz. Any gain setting. Source impedance 50 ohms.
20Hz to 20kHz ±0.2dB (–3dB @ 100kHz)
Common Mode Rejection Ratio (CMRR)
Input level +20dBu, ground referenced.
20Hz to 10kHz> 50dB
THD + Noise
Gain +0dB, input level +4dBu. Compressor switched out.
20Hz to 20kHz (80kHz filter)< 0.008%, typically 0.005%
Gain +0dB, input level +20dBu. Compressor switched out.
20Hz to 20kHz (80kHz filter)< 0.01%, typically <0.006%
THD with the compressor switched in is dependent on attack and release times and signal content.
Crosstalk
Apply +20dBu test tone to either channel input with the other input terminated with 50 ohms. Crosstalk is the ratio of level at the output of the test channel and the output of the channel to which the signal is applied.
Crosstalk @ 50HZ< –110dB
Crosstalk @ 1kHz< –100dB
We use cookies to keep our websites running and secure, and to help us provide you with the best possible experience. By clicking "Accept", you consent to the use of these cookies for advertising and analytical purposes.
