Mac Aura, Mac Viper, Robe Wash...
Search
Log in Register
EN FR

AudioPLM10000Q LAB GRUPPEN 4 x 2500W amplifier with LAKE processor

Quantity
ex
Project List Available
All channels driven10800 WPeak output voltage per channel150 VMax. output current per channel35.5 ArmsMax. Output Power2 ohms2.7 ohms4 ohms8 ohms16 ohmsAll ch.’s driven2500 W2700 W2300 W1200 W660 WChannels A and B, while channels C and D are driven at -3 dB 3)2500 W2900 W2400 W1200 W660 WAudio PerformanceTHD + N 20 Hz - 20 kHz for 1 W<0.05%THD + N at 1 kHz and 1 dB below clipping<0.04%Dynamic range with digital inputs (for all supported sample rates)>116 dBADynamic range with analog inputs>114 dBFrequency response (1 W into 8 ohms, 20 Hz - 20 kHz)+ /-0.05 dBCMR> 50 dBInternal sample rate96 kInternal data path32 bit floating pointProduct propagation delay, best case (96 kHz AES)1.64 msProduct propagation delay, analog input1.71 msProduct propagation delay, worst case (44.1 kHz AES)1.90 ms
PLM 10000Q Powered Loudspeaker Management systemThe PLM 10000Q seamlessly integrates networked digital signal distribution, drive processing, power amplification, and load veri-fication and performance monitoring in a single hardware unit and unified software controller. This new approach, designated Powered Loudspeaker Management (PLM), is a joint development of Dolby®Lake®* and Lab Gruppen. As a cohesive system, the PLM 10000Q affords significant advantages when compared to conventional approaches utilizing separate components.
Search for this product used on