AudioAN16i-V2 AVIOM 16 line input converter Pro16e
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
The AN-16/i v.2 Input Module is used to connect up to 16 balanced line-level inputs from a mixing console’s direct outputs, insert points, aux sends, and/or submixes to a personal mixing system. When used alone, one AN-16/i v.2 can generate a single 16-channel A-Net signal.
The A-Net In on the AN-16/i v.2 allows multiple Pro16 input devices (including console cards, AN-16/i-M, and the original AN-16/i) to be connected together to generate the higher channel count Pro16e™ version of A-Net used by the A360 Personal Mixer and A320 Personal Mixer.
The A-Net In on the AN-16/i v.2 allows multiple Pro16 input devices (including console cards, AN-16/i-M, and the original AN-16/i) to be connected together to generate the higher channel count Pro16e™ version of A-Net used by the A360 Personal Mixer and A320 Personal Mixer.
Audio Inputs 16, balanced line-level, 1/4-inch TRS connector
Inputs Tip: Audio +; Ring: Audio -; Sleeve: Ground
TRS Thru Impedance matched output
Analog to Digital Conversion 48kHz sample rate, 24 bit
Frequency Response 4Hz-22kHz
A- Net In One Category 5 (RJ45 connector)
Four-position slot range selector switch for use with Pro16e A-Net
A-Net Out One Category 5 (RJ45 connector)
Gain Settings Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
Channel LED Indicators Signal Present and Clip, per channel
Line Inputs Impedance: 48k ohms
Metering LEDs; green: Signal Present, red: Clip; per channel
Stereo Operation Stereo Link, per channel pair;
Two-position switch (Normal, Link)
Maximum Input Level +22dBu
Input Impedance 17.8k ohm
Freq. Response 4Hz-22kHz +0.2dB/-3dB
THD +N < 0.003%
Crosstalk -90dB
Bit Error Rate (BER) 10(-12)
Signal to Noise (unweighted) 90dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o Output Module
Digital Outputs A-Net: 1; RJ45 connector
Pro16e A-Net Use unshielded Cat-5e UTP (or better) cable
Latency <0.880 msec (measured from analog input to analog output)
Power Supply
Input Voltage
Output Voltage
Plug Size External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm
Power 18-24 VDC, 500mA
Dimensions 19" (482.6 mm) wide x 5.75" (146 mm) deep;
1U high
Weight 6.8 lb (3.08 kg)
Inputs Tip: Audio +; Ring: Audio -; Sleeve: Ground
TRS Thru Impedance matched output
Analog to Digital Conversion 48kHz sample rate, 24 bit
Frequency Response 4Hz-22kHz
A- Net In One Category 5 (RJ45 connector)
Four-position slot range selector switch for use with Pro16e A-Net
A-Net Out One Category 5 (RJ45 connector)
Gain Settings Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
Channel LED Indicators Signal Present and Clip, per channel
Line Inputs Impedance: 48k ohms
Metering LEDs; green: Signal Present, red: Clip; per channel
Stereo Operation Stereo Link, per channel pair;
Two-position switch (Normal, Link)
Maximum Input Level +22dBu
Input Impedance 17.8k ohm
Freq. Response 4Hz-22kHz +0.2dB/-3dB
THD +N < 0.003%
Crosstalk -90dB
Bit Error Rate (BER) 10(-12)
Signal to Noise (unweighted) 90dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o Output Module
Digital Outputs A-Net: 1; RJ45 connector
Pro16e A-Net Use unshielded Cat-5e UTP (or better) cable
Latency <0.880 msec (measured from analog input to analog output)
Power Supply
Input Voltage
Output Voltage
Plug Size External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm
Power 18-24 VDC, 500mA
Dimensions 19" (482.6 mm) wide x 5.75" (146 mm) deep;
1U high
Weight 6.8 lb (3.08 kg)