AudioUPJuniorXP MEYER SOUND 2 way 8"+2" VarioQ 80°x50° powered speaker
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
The UPJunior‑XP, with IntelligentDC technology, offers the same sonic signature, robust peak power output, and rotatable VariO horn as the UPJunior but with the added flexibility of external DC power. Externally powering the loudspeakers facilitates long cable runs that do not require AC conduits. Meyer Sound designed the UPJunior‑XP for flexibility. With its extraordinary size‑to‑power ratio and generous rigging options, the ultracompact UPJunior‑XP is well suited for use as a single, primary loudspeaker or as part of multicabinet horizontal or vertical arrays.
ACOUSTICAL
Operating Frequency Range270 Hz – 20 kHz
Frequency Response376 Hz – 18 kHz ±4 dB
Phase Response250 Hz – 18 kHz ±45°
Linear Peak SPL4123.5 dB with 18.5 dB crest factor (M-noise), 121.5 dB (Pink noise), 121 dB (B‑noise)
COVERAGE
80° x 50° or 50° x 80° (rotatable horn)
TRANSDUCERS
Low FrequencyOne 8‑inch cone driver with neodymium magnet; 4 Ω nominal impedance
High FrequencyOne 2‑inch compression driver; 12 Ω nominal impedance
AUDIO INPUT
TypeDifferential, electronically balanced
Maximum Common Mode Range±15 V DC, clamped to earth for voltage transient protection
ConnectorsPhoenix 5‑pin Male; SwitchCraft 5‑pin Male; ECO‑M 7‑pin Male (two pins for 48 V DC power, three pins for balanced audio)
Input Impedance10 kΩ differential between positive (+) and negative (‑) audio pins
Wiring5Phoenix 5‑pin MalePin 1: DC Power (‑)Pin 2: DC Power (+) Pin 3: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 4: Audio (‑)Pin 5: Audio (+)
SwitchCraft EN3 5‑pin MalePin 1: DC Power (‑)Pin 2: DC Power (+) Pin 3: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 4: Audio (‑)Pin 5: Audio (+)ECO‑M 7‑pin Male5Pin 1: DC Power (‑)Pin 2: DC Power (+) Pin S: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 5: Audio (‑)Pin 6: Audio (+)Nominal Input Sensitivity0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
Input LevelAudio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
AMPLIFIER
Type2‑channel, Class‑DTotal Output Power6580 W peakTHD, IM, TIM< 0.02%CoolingConvection
DC POWER
ConnectorPhoenix 5‑pin Male; SwitchCraft 5‑pin Male; ECO‑M 7‑pin Male (two pins for 48 V DC power, three pins for balanced audio)Safety Rated Voltage Range48 V DC
PHYSICAL
DimensionsW: 9.00 in (229 mm) x H: 19.04 in (484 mm) x D: 10.20 in (259 mm)
Weight26 lb (11.8 kg)
EnclosurePremium multi‑ply birch, slightly textured black finish
Protective Grille
Powder‑coated, hex‑stamped steel with acoustical black mesh
RiggingAluminum end plates for mounting/flying cabinets with QuickFly and standard rigging options; metric M8 threaded points used for all UPJunior rigging
Operating Frequency Range270 Hz – 20 kHz
Frequency Response376 Hz – 18 kHz ±4 dB
Phase Response250 Hz – 18 kHz ±45°
Linear Peak SPL4123.5 dB with 18.5 dB crest factor (M-noise), 121.5 dB (Pink noise), 121 dB (B‑noise)
COVERAGE
80° x 50° or 50° x 80° (rotatable horn)
TRANSDUCERS
Low FrequencyOne 8‑inch cone driver with neodymium magnet; 4 Ω nominal impedance
High FrequencyOne 2‑inch compression driver; 12 Ω nominal impedance
AUDIO INPUT
TypeDifferential, electronically balanced
Maximum Common Mode Range±15 V DC, clamped to earth for voltage transient protection
ConnectorsPhoenix 5‑pin Male; SwitchCraft 5‑pin Male; ECO‑M 7‑pin Male (two pins for 48 V DC power, three pins for balanced audio)
Input Impedance10 kΩ differential between positive (+) and negative (‑) audio pins
Wiring5Phoenix 5‑pin MalePin 1: DC Power (‑)Pin 2: DC Power (+) Pin 3: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 4: Audio (‑)Pin 5: Audio (+)
SwitchCraft EN3 5‑pin MalePin 1: DC Power (‑)Pin 2: DC Power (+) Pin 3: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 4: Audio (‑)Pin 5: Audio (+)ECO‑M 7‑pin Male5Pin 1: DC Power (‑)Pin 2: DC Power (+) Pin S: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 5: Audio (‑)Pin 6: Audio (+)Nominal Input Sensitivity0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
Input LevelAudio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
AMPLIFIER
Type2‑channel, Class‑DTotal Output Power6580 W peakTHD, IM, TIM< 0.02%CoolingConvection
DC POWER
ConnectorPhoenix 5‑pin Male; SwitchCraft 5‑pin Male; ECO‑M 7‑pin Male (two pins for 48 V DC power, three pins for balanced audio)Safety Rated Voltage Range48 V DC
PHYSICAL
DimensionsW: 9.00 in (229 mm) x H: 19.04 in (484 mm) x D: 10.20 in (259 mm)
Weight26 lb (11.8 kg)
EnclosurePremium multi‑ply birch, slightly textured black finish
Protective Grille
Powder‑coated, hex‑stamped steel with acoustical black mesh
RiggingAluminum end plates for mounting/flying cabinets with QuickFly and standard rigging options; metric M8 threaded points used for all UPJunior rigging