Similar to PB-05 but with the sensor on the flat side. A 4 mm threaded hole for attaching a clamp is on the back. It can therefore be mounted on the stem of a microphone stand, and will be somewhat hidden behind the stand, while still detecting the presence of someone near the stand. The PB-07 can also be connected to a gooseneck microphone. Dimensions: 68mm x 35mm x 21mm (L x H x W).
Connectors: 3-pin XLR (1 = ground, 2 = plus, 3 = minus)
Housing construction: Black galvanized aluminum (except PB-09, cast iron, black powder coated)
Sensing distance: Adjustable 150 mm-1.2 m
Detection angle: +/-10 degrees
Switching noise: Not measurable
Frequency response: 0 Hz - 22 kHz, -3 dB, 150 ohm microphone impedance
Signal-to-noise ratio: -88 dB with 100 mV rms input and 150 ohm microphone
Distortion: Less than 0.05% with 100 mV signal
Activation delay: Less than 0.2 seconds
Delay on: Approximately 1 second (other delays available on special order)
Microphone attenuation on: 0 dB
Microphone attenuation off: 42 dB with 150 ohm microphone impedance
Used microphone types All types of dynamic and phantom-powered microphones (up to 10 mA current consumption)
Maximum input level: +3 dB (1.1 V)
Ambient light range: 0-20000 Lux in daylight and 0-12000 Lux in artificial light
Distance measurement: Active infrared reflection principle with 3-bit coding
Power supply: Phantom P48 power supply (transmitted to microphone)
Power consumption: Approx. 3.7 mA.
We use cookies to keep our websites running and secure, and to help us provide you with the best possible experience. By clicking "Accept", you consent to the use of these cookies for advertising and analytical purposes.
