AudioDTP640REX Lewitt 2-way dynamic and static cardioid microphone
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
Your mic for double-power kick drum sound.The DTP 640 REX is a dual-element microphone specifically designed to capture the sound of your drums and percussion instruments. It consists out of two phase-aligned capsules, a condenser and a dynamic one. You can switch between three sounds for more flexibility for studio and live applications.Unique sound for bass drums and other bassheavyinstruments.Dual-element kick drum microphoneTwo capsules for the best of your source.We put two phase-aligned microphones in a single housing. The dynamic side ensures accurate attack reproduction of the kick drum, while the condenser element captures the drum's low end. Each element has a dedicated output.This enables you to shape the kick drum sound in unique ways.
Features:Dynamic and condenser capsule in one housing/Separate outputs for both capsules/For kick drum and other bass-heavy sources/Three switchable sound characteristics/Cardioid polar pattern/Type:Dynamic, moving coil, Condenser, permanently polarized/Acoustical operating principle:Pressure gradient transducer/Transducer Ø:31.7 mm, 1.25 in/Transducer Ø: 22.4 mm, 0.88 in/Polar pattern:Cardioid/Frequency range (dynamic):20 ... 16,000 Hz/Frequency range (condenser):20 ... 20,000 Hz/EFR, ‘Enhanced Frequency Response' settings/Sensitivity, = // = FFR:0.4 mV/Pa (-69 dBV), dynamic.2 mV/Pa (-54 dBV), condenser/Sensitivity, + // = Dynamic EFR:0.4 mV/Pa, -69 dBV/Pa, dynamic.2 mV/Pa, -54 dBV/Pa, condenser/Sensitivity, + // + Dual EFR: Condenser and dynamic matched at 1 mV/Pa, -60 dBV/Equivalent noise level:28 dB (A)/Max. SPL for 0.5 % THD:150 dBSPL, 0 dB pre-attenuation/Dynamic range of mic. amp. (condenser):122 dB/Pre-attenuation pad:0 dB.-10 dB.-20 dB/Rated impedance dynamic:500 Ω/Rated impedance condenser:200 Ω/Supply voltage:48 V ± 4 V/Current consumption:2 mA/ Connector:Gold plated 3-pin and 5-pin XLR/Cable:1.5 m (4.95’) dual shielded Y-cable, 5-pin XLR into two 3-pin XLRs/Microphone dimensions:71 dia. x 158 mm, 2.8 dia. x 6.2 in/Microphone net weight:755 g, 27.3 oz