AudioR121 ROYER Ribbon microphone
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
The R-121 is a compact bi-directional (figure-eight) velocity type ribbon microphone designed for professional applications. The figure-eight pick-up pattern allows the R-121 to be addressed from either side with equal sensitivity. The in-phase signal is achieved when the microphone is addressed from the front, indicated by the “ROYER” logo.The R-121 is reasonably tolerant to shock and vibration, and performance is unaffected by changes in temperature or humidity. However, ribbon microphones are somewhat more sensitive to direct blasts of air, and the R-121 is no exception to this rule. Discretionary use of a windscreen or pop screen, such as the Royer PS-101, WS58 or equivalent, is highly recommended for close-miking vocalists or certain types of percussion and wind instruments.
Features:High SPL Capabilities/No internal active electronics to overload or produce distortion up to maximum SPL rating/Extremely low residual noise/Ribbon element is not affected by heat or humidity/Absence of high frequency phase distortion/Equal sensitivity from front or back of element/Consistent frequency response regardless of distance/Caracteristiques techniques:Acoustic Operating Principle: Electrodynamic pressure gradient/Polar Pattern: Figure-8/Generating Element: 2.5-micron aluminum ribbon/Magnets: Rare Earth Neodymium/Frequency Response: 30 -15,000 Hz +/- 3dB/Sensitivity: -47 dBv Re. 1v/pa/Output Impedance: 300 Ohms @ 1K (nominal)/Rated Load Impedance: >1500 Ohms @ 300 Ohms/Maximum SPL: >135dB @ 20 Hz/Output Connector: Male XLR 3 pin (Pin 2 Hot)/Dimensions: 155.7mm L, 25mm W (6.13" L, 1" W)/ Weight: 244g (8.6 oz) Finish: Dull Satin Nickel/Matte Black Chrome optional/