AudioDRSQ4 PHOENIX AUDIO Stereo DI Preamp
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
Available in mono (1/2RU or 500-series), stereo (1RU) or in 8-channels (2RU), the Phoenix DRS Mic Preamp/DIs take a modern approach to Class-A circuit design that delivers a wide range of tones without sacrificing the beloved vibe of true Class-A design.
The unique DRS circuit can go from ultra-clean sounds suitable for audiophile recordings all the way to the warm, saturated tones reminiscent of the UK's most heralded vintage designs. Versatility and superior sound have made the DRS Preamp/DI a top-tier choice for engineers around the world and a modern day classic.
The unique DRS circuit can go from ultra-clean sounds suitable for audiophile recordings all the way to the warm, saturated tones reminiscent of the UK's most heralded vintage designs. Versatility and superior sound have made the DRS Preamp/DI a top-tier choice for engineers around the world and a modern day classic.
1U unit: With 240V/110V mains voltage input selector switch
Class A (DSOP-2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB,
Maximum Output Level: +26dBu @ 1kHz
Noise: -90dB @ 20Hz to 20kHz.
Output connections: XLR and TSR 1/4″ Jack on rear
Phoenix Audio’s unique Class A, transformer-less, True balanced Mic input stage.
10K mic impedance for high quality performance with all mic particualry ribbons mics & dynamic mics
Phoenix Audio’s custom wound output transformer.
Microphone/Line input: XLR on Rear Panel
DI inputs: ¼” TS Jack on Front Panel
Individual Earth Lift: Push-button Switches
Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
Gain reduction: -30dB push-button Mic/Line switch (Mic input)
High Input Impedance DI: Mono 1/4″ Jack on front panel (no FETs)
Gain Meter: LED Metering. (Green = 0dB, Yellow = +8dB, corresponding to “4” and “6” on a PPM Meter).
Phantom Power: Switchable phantom on Push-button Switch
High Pass Filter: Roll-off starts at 120Hz @ 6dB per Octave.
Phase Reverse: on Push-button Switch
Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency Response: DI Input Stage: -0.3dB @ 40Hz, – 0.5dB @ 25kHz
Typical Headroom: +26dB on Mic-Pre stage
Gyratory-based EQ Frequency Centres: (4 Bands) High – 15K, 10K, Hi Mid – 6K, 3K, 1K6, Low Mid – 800Hz, 400Hz, 200Hz, Low – 130Hz, 80Hz, 40Hz
EQ Cut/Boost Levels: 16dB Cut/Boost Per Band with fully detented pots in 21 positions
DI Stage gain: Maximum of 30dB
All units are wired with PTFE silver military grade cable