Audio2016 EVENTIDE PRINCETON AES & Midi Stereo Reverb
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
4 Reverb Effects and a dedicated UI
Recreates 3 original SP2016 reverb effects
Stereo Room
Room Reverb
High Density Plate
An all new reverb
Fast top level UI (one knob - one job) optimized for Studio and Live performance
Store up to 99 user defined presets.
Digital Input/Output (S/PDIF)
Input Kill switch, bypass switch
Software programmable footswitch
>104dB Signal to Noise
24 bit conversion
MIDI In & Out
20 Hz - 20 kHz +/-1dB
Pro levels (+4 db nom) and connections (XLR and 1/4")
Balanced/unbalanced input selection via rear panel, push button switch
Direct Input for High Impedance instruments (Guitars,etc).
Audio Input
Connectors
1/4" T/R/S phone jacks (2)
XLR 3-wire balanced (2)
Impedance
+4dB/Bal switch position: 100kOhm
-10dB/Unbal switch position: 50K Ohms
Levels
+4dB/Bal switch position:
-2dBu min for full scale
+20dBu max
-10dB/Unbal switch position:
-14dBu min for full scale
+8dBu max
Audio Output
Connectors
1/4" T/R/S phone jacks (2)
XLR 3-wire balanced (2)
Impedance
125 Ohms, each side, balanced
Levels
+18dBm max, full scale, balanced/unbalanced
Digital Input/Output
Digital Input
Digital S/PDIF Input
Sample Rate: 44.1kHz - 48kHz (downsampled to 40kHz)
Connector: Coaxial, RCA type
Digital Input is selected via front panel switch.
Digital Output
Digital S/PDIF output
Sample Rate: 44.1kHz or 48kHz with ext clock
Connector: Coaxial, RCA type
Digital output is always active at 44.1 kHz when not using digital input
Frequency Response
Dry 20Hz-20kHz, +/-1dB
Wet 20Hz-16kHz, +-1dB
Dynamic Range
>90dB
20 Hz - 20 kHz, Non A-weighted
Sample Rate
40.0 kHz
Conversion
24 Bits A/D, 24 Bits D/A
Environment
Operating temperature: 32° to 104°F (0° to 40°C)
Storage: �20° to 170°F (-30 to 75°C)
Relative humidity: 95% non-condensing
Throughput delay
Less than 2 ms.
THD
<= .05% , 20Hz - 20kHz
Crosstalk
<= 45dB below full scale
Dimensions
Width 19"
Depth 6"
Height 1.75"
Weight tbd
Connectors
1/4" T/R/S phone jacks (2)
XLR 3-wire balanced (2)
Impedance
+4dB/Bal switch position: 100kOhm
-10dB/Unbal switch position: 50K Ohms
Levels
+4dB/Bal switch position:
-2dBu min for full scale
+20dBu max
-10dB/Unbal switch position:
-14dBu min for full scale
+8dBu max
Audio Output
Connectors
1/4" T/R/S phone jacks (2)
XLR 3-wire balanced (2)
Impedance
125 Ohms, each side, balanced
Levels
+18dBm max, full scale, balanced/unbalanced
Digital Input/Output
Digital Input
Digital S/PDIF Input
Sample Rate: 44.1kHz - 48kHz (downsampled to 40kHz)
Connector: Coaxial, RCA type
Digital Input is selected via front panel switch.
Digital Output
Digital S/PDIF output
Sample Rate: 44.1kHz or 48kHz with ext clock
Connector: Coaxial, RCA type
Digital output is always active at 44.1 kHz when not using digital input
Frequency Response
Dry 20Hz-20kHz, +/-1dB
Wet 20Hz-16kHz, +-1dB
Dynamic Range
>90dB
20 Hz - 20 kHz, Non A-weighted
Sample Rate
40.0 kHz
Conversion
24 Bits A/D, 24 Bits D/A
Environment
Operating temperature: 32° to 104°F (0° to 40°C)
Storage: �20° to 170°F (-30 to 75°C)
Relative humidity: 95% non-condensing
Throughput delay
Less than 2 ms.
THD
<= .05% , 20Hz - 20kHz
Crosstalk
<= 45dB below full scale
Dimensions
Width 19"
Depth 6"
Height 1.75"
Weight tbd