Rated output power 30W
Frequency range FCC -CCIR - OIRT - JPN
Operational Mode Mono, Stereo, Multiplex
Modulation type F3E
Primary Power 80 ÷ 260 Vac or 24 Vdc
AC Power Consumption 120 VA / 70W
Phisical Dimensions (W x H x D) 483 x 88 x 394 mm
Weight 5 kg
Environmental Working Conditions -10 ÷ +50 °C / 95% relative Humidity non condensing
Cooling Forced, with internal fan
Frequency programmability From software, with 10 kHz steps
Frequency stability ±1 ppm
Pre-emphasis mode 0/50 (CCIR) ?S, 75 (FCC) ?S
Spurious & harmonic suppression <75 dBc (80 typical)
Asynchronous AM S/N ratio ? ? dB (typical 70)
Synchronous AM S/N ratio ? ? dB (typical 60)
MONO OPERATION
S/N FM Ratio > 80 dB RMS (typical 83 dB)
Frequency Response < ± 0.5 dB 30Hz ÷ 15kHz (typical ± 0.2 dB)
Total Harmonic Distortion < 0.1 % 30 Hz ÷ 15 kHz (typical 0.07 %)
Intermodulation distortion < 0.02 % with 1 kHz and 1,3 kHz tones
MPX OPERATION
Composite S/N FM Ratio > 80 dB RMS (typical 83 dB)
Frequency Response ± 0.2 dB 30Hz ÷ 53kHz / ± 0.5 dB 53kHz ÷ 100 kHz
Total Harmonic Distortion < 0.1% 30Hz ÷ 53kHz
Intermodulation distortion < 0.05% with 1 kHz and 1,3 kHz tones
INTERNAL STEREO CODER OPERATION
Stereo S/N FM Ratio > 75 dB RMS (typical 77dB)
Frequency Response ± 0.5 dB 30 Hz ÷ 15 kHz
Total Harmonic Distortion < 0.05% 30 Hz ÷ 15 kHz
Intermodulation distortion ? 0.03% with 1 kHz and 1,3 kHz tones
Stereo separation > 50 dB 30 Hz ÷ 15 kHz (typical 55 dB)
AUDIO INPUT CONNECTORS
Left / Right XLR balanced Impedance: 10 k or 600 ohm Level: -13 to +13 dBu
MPX unbalanced/RDS BNC unbalanced Impedance: 10 k or 50 ohm Level: -13 to +13 dBu
SCA/RDS 2 x BNC unbalanced Impedance: 10 k Level: -8 to +13 dBu
OTHER CONNECTORS
RF Output N (50 ohm)
RF Monitor BNC (- 30dBr referred to RF output )
Pilot output BNC (1Vpp)
Interlock Input BNC

Share via