The Manley TUBE DIRECT INTERFACE models feature exceptionally clean and quiet tube circuits which will warm up any electric guitar, bass, violin, and especially those sterile sounding synths. Unique with the Manley Tube DI's is the added 5-position high pass shelf EQ, there to fight unwanted resonances. As splitter devices, the transformer-coupled balanced XLR output can be sent directly to a mic level input, such as through your console channel, while the 1/4" output drives the guitar amplifier cabinet which can be miked and mixed with the direct feed. Low impedance outputs, Ground lift and Console Out Boost switches make these units both versatile and compatible. Keep your Manley DI close at hand to get that noisy high impedance guitar cable into quiet lo-Z territory fast!
Vacuum Tube: 5751
Gain: -6dB or -26dB
Input Z: 10 megOhm to 1 megOhm
Output Z: 150 Ohm xfmr
Frequency response: 12 Hz - 15KHz (-3dB)
EQ: LF rolloff -3dB points: 12, 42, 100, 250Hz
Transformer-Coupled Balanced XLR Output
Console Out Boost Switch
Ground Lift Switch
Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
Operating Mains Voltage changeable with power transformer re-wiring and fuse value change.
Mains Voltage Frequency: 50~ 60Hz
Mains power consumption Mono Tube DI:
0.050 Amps (50 milliamps = 50mA) @ 120V = 6 Watts
0.025 Amps (25 milliamps = 25mA) @ 240V = 6 Watts
Mains power consumption Stereo Tube DI:
0.0750 Amps (75 milliamps = 75mA) @ 120V = 9 Watts
0.0375 Amps (37.5 milliamps = 37.5mA) @ 240V = 9 Watts
Dimensions:
Mono Tube DI: 1.75" x 13.5" x 4"
Stereo Tube DI: 1.75" x 19" x 10" (Occupies 1U)
Unit Weight:
Mono Tube DI: 3 lbs.
Stereo Tube DI: 6 lbs.
We use cookies to keep our websites running and secure, and to help us provide you with the best possible experience. By clicking "Accept", you consent to the use of these cookies for advertising and analytical purposes.
