Projector type 3-Chip DLPTMprojector
Display method DLPTM chip x 3, DLPTM projection system
Display Device -> Panel size 24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
Display Device -> Number of pixels 2,304,000 (1920 x 1200 pixels) x 3
Light source Laser diodes (Blue LD, Red LD)
Light output *1 30,500 lm
Light output (ANSI) 30,500 lm
Light output (Center) *1 *2 32,000 lm (Center)
Time until light output declines to 50 % -> NORMAL *3 20,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO *3 24,000 hours [ECO]
Time until light output declines to 50 % -> QUIET *6 26,000 hours [QUIET]
Resolution 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)
Contrast Ratio (typ.) *1 20,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen size (diagonal) 1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/ET-D3LEW200
Center-to-corner zone ratio *1 90%
Lens Optional (no lens included with this model)
Lens shift -> Vertical(from center of screen)　 *4 ±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered)
Lens shift -> Horizontal(from center of screen)　 *4 ±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)
Keystone correction range Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95),Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95)When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals -> SDI IN BNC x 1 : 3G/HD-SDI input(PT-RZ34K only)
Terminals -> HDMI™ IN HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input)*5
Terminals -> DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP) (Single-link only)(PT-RZ34K only)
Terminals -> MULTI PROJECTOR SYNC IN BNC x 1
Terminals -> MULTI PROJECTOR SYNC OUT BNC x 1
Terminals -> MULTI SYNC IN/ 3D SYNC 1 IN/OUT (dual purpose) BNC x 1(PT-RZ34K only)
Terminals -> MULTI SYNC OUT/ 3D SYNC 2 OUT (dual purpose) BNC x 1(PT-RZ34K only)
Terminals -> SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals -> SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals -> REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
Terminals -> REMOTE 1 OUT M3 stereo mini-jack x 1 for link control
Terminals -> REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
Terminals -> DIGITAL LINK IN / LAN RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseTTM compliant), 100Base-TX, compatible with Art-Net, PJLinkTM (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5
Terminals -> LAN RJ-45 x 1 for network connection, PJLinkTM (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals -> DC OUT USB Type A x 2 (for power supply, DC 5 V total of 2 A)
Terminals -> USB TYPE A USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick
Terminals -> SLOT SLOT 1/SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible
Power supply AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V)
Maximum power consumption 2,550 W
On-mode power consumption(Operating mode) -> Normal [NORMAL]　2,060 W
On-mode power consumption(Operating mode) -> Eco [ECO]　1,650 W
On-mode power consumption(Operating mode) -> Quiet *9 *10 [QUIET]　1,370 W
Standby power consumption -> Normal 14 W
Cabinet materials Molded plastic
Filter No
Operation noise -> Normal *1 49 dB [NORMAL]
Operation noise -> Quiet *1 46 dB [QUIET]
Dimensions (W x H x D) Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝) (not including protruding parts)
Dimensions (W x H x D) -> Width (not including protruding parts) 598 mm (23 17/32˝)
Dimensions -> Height (not including protruding parts) 353 mm (13 29/32˝)
Dimensions -> Depth (not including protruding parts) 780 mm (30 23/32˝)
Weight [kg] *7 69.8 kg (153.9 lbs)
Operating environment -> Operating temperature *8 *9 0–45 °C (32–113 °F)
Operating Environment -> Operating humidity (No condensation) 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/AndroidTM
Body Colour Black
Gross Dimensions (W x H x D in mm) 957 x 790 x 702 mm
Gross Weight (Kg) RQ35KU/RQ35KUY/RQ35KU1/RQ35KEX: 84.5 kg (186.4 lbs)
RQ35KEJ/RQ35KE: 84.7 kg (186.6 lbs)
NFC https://docs.connect.panasonic.com/projector/products/smartpjcontrol/regional.html#regional
EAN RQ35KEJ: 5025232941490
RQ35KE: 8887549844348
Descripción de la nota al pie
When [OPERATING MODE] is set to [NORMAL].
Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
Average light-output value of all shipped products measured at the center of the screen.
Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Normal Mode, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
Lens shift is not supported on the ET-D3LEW50.
4K signals are converted to WUXGA (1920 x 1200 pixels) only for the PT-RZ34K2 / PT-RZ34K.
Average value. May differ depending on the actual unit.
When optional AJ-WM50 wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).
Some applications listed are currently subject to temporary limitations. For details, please click here.

Share via