LightingRobe Robin Tetra 1
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
TETRA1 is a linear bar built on the highly successful Spiider and Tarrantula technology. Despite its shorter length, TETRA1 maintains the same features, quality and pixel spacing as TETRA2..
Source
Light source type: 9x 40W RGBW LED multichips
LED life expectancy: min. 50.000 hours
Typical lumen maintenance: L70/B50 @ 50.000 hours
Optical system
Robe’s proprietary optical design
Zoom range: 4°- 45°
High efficient component optics
Fixture total lumen output
5.300 lm (integrating sphere)
4.225 lm (goniophotometer)
Dynamic Effects and Features
Colour mixing mode RGBW or CMY
Individual control of each RGBW pixel
Variable CCT: 2.700K - 8.000K
Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
1x MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)
Motorized zoom
Pre-programmed random strobe & pulse effects
Electronic strobe effect with variable speed up to 20 Hz
High resolution electronic dimming: 0 - 100%
L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
Control and programming
Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
REAP™ - Robe Ethernet Access Portal
Wireless CRMX™ technology from Lumen Radio - on request
DMX Protocol modes: 6
Control channels: 25, 45, 59, 68, 72, 81
RGBW / CMY: 8 or 16 bit
Zoom: 8 or 16 bit
Dimmer: 8 or 16 bit (internal 18 bit)
Movement
Tilt movement: 191°
16 bit movement resolution
Controllable speed of Tilt movement
Thermal specification
Maximum ambient temperature: 40°C (104°F)
Maximum surface temperature: 70°C (158°F)
Minimum operating temperature: -5°C (23°F)
Total heat dissipation: max. 1023 BTU/h (calculated)
Electrical specification and connections
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: max. 300 W
Power in/out connector: Neutrik powerCON TRUE1 in/out
DMX and RDM data in/out: Locking 5-pin XLR
Ethernet port in/out: RJ45
Embedded Ethernet switch 10/100 Mbps
Mechanical specification
Height: 279 mm (10.98") - head in vertical position
Width: 508 mm (20”)
Depth: 192 mm (7.56") - head in horizontal position
Weight: 11.3 kg (24.9 lbs)
Ingress protection rating: IP20
Rigging
Mounting points: 2 pairs of 1/4-turn locking points
2x Omega adaptors with 1/4-turn quick locks
Universal operating position
Safety cable attachment point
Light source type: 9x 40W RGBW LED multichips
LED life expectancy: min. 50.000 hours
Typical lumen maintenance: L70/B50 @ 50.000 hours
Optical system
Robe’s proprietary optical design
Zoom range: 4°- 45°
High efficient component optics
Fixture total lumen output
5.300 lm (integrating sphere)
4.225 lm (goniophotometer)
Dynamic Effects and Features
Colour mixing mode RGBW or CMY
Individual control of each RGBW pixel
Variable CCT: 2.700K - 8.000K
Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
1x MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)
Motorized zoom
Pre-programmed random strobe & pulse effects
Electronic strobe effect with variable speed up to 20 Hz
High resolution electronic dimming: 0 - 100%
L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
Control and programming
Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
REAP™ - Robe Ethernet Access Portal
Wireless CRMX™ technology from Lumen Radio - on request
DMX Protocol modes: 6
Control channels: 25, 45, 59, 68, 72, 81
RGBW / CMY: 8 or 16 bit
Zoom: 8 or 16 bit
Dimmer: 8 or 16 bit (internal 18 bit)
Movement
Tilt movement: 191°
16 bit movement resolution
Controllable speed of Tilt movement
Thermal specification
Maximum ambient temperature: 40°C (104°F)
Maximum surface temperature: 70°C (158°F)
Minimum operating temperature: -5°C (23°F)
Total heat dissipation: max. 1023 BTU/h (calculated)
Electrical specification and connections
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: max. 300 W
Power in/out connector: Neutrik powerCON TRUE1 in/out
DMX and RDM data in/out: Locking 5-pin XLR
Ethernet port in/out: RJ45
Embedded Ethernet switch 10/100 Mbps
Mechanical specification
Height: 279 mm (10.98") - head in vertical position
Width: 508 mm (20”)
Depth: 192 mm (7.56") - head in horizontal position
Weight: 11.3 kg (24.9 lbs)
Ingress protection rating: IP20
Rigging
Mounting points: 2 pairs of 1/4-turn locking points
2x Omega adaptors with 1/4-turn quick locks
Universal operating position
Safety cable attachment point