VidéoVP Christie Roadster WU14K-M
Quantité
ex
Liste des Projets disponibles
Description
Caractéristiques
Partager
Fiche Produit
With a ruggedized, compact form factor, the Roadster WU14K-M projector provides high-performance and feature-rich options that you have come to expect in all Christie products. With embedded warping, blending and color matching, portrait capabilities and a wide variety of high-quality lenses that use our Intelligent Lens System (ILS™), the M series provides extensive installation flexibility for any application.
The Christie WU14K-M, at 14,000 lumens also offers high efficiency by giving you more brightness while using less power for a low cost of ownership. Combined with a 3-year warranty and our industry-leading service and support, the M Series offers performance and peace of mind.
The Christie WU14K-M, at 14,000 lumens also offers high efficiency by giving you more brightness while using less power for a low cost of ownership. Combined with a 3-year warranty and our industry-leading service and support, the M Series offers performance and peace of mind.
ISO lumens
14,062
Center lumens
13,500
ANSI lumens
12,500
Contrast ratio
10,000:1
Display type
0.96" 3DLP
Digital micromirror device
3DLP 0.96" DMD
Resolution
WUXGA (1920 x 1200)
Illumination type
Dual 450W lamp
Illumination performance (hrs)
Standard: 1750 hrs | Eco mode: 2000 hrs
Orientation
Portrait OR 360° vertically
Scan rates
Horizontal: 15 to 120 kHz / Vertical: 23.97 to 150 Hz
Pixel clock rate
165 MHz
Standard inputs
Twin DisplayPort input card
Dual-link DVI input card
3G SD/HD-SDI
Optional inputs
Dual-link DVI
Dual 3G SD/HD-SDI
Twin HDMI w/Active loop through
Twin DisplayPort input card
Dual-link DVI input card
3G SD/HD-SDI
Control & networking
RS232 in/out
RS422 in
Ethernet (10/100)
USB
GPIO (RS232 9-pin male connector)
Built-in backlit LCD keypad
Remote control (with optional wired XLR connection)
Optical systems
Dust sealed, 3-chip DMD light engine
Scheimpflug (tilt) adjustment
Motorized horizontal and vertical lens offset
Built-in light shutter
Tool-free lens insertion system
Fixed lenses
0.67:1 ILS lens
1.1:1 ILS lens
Zoom lenses
1.16-1.49:1 ILS lens
1.4-1.8:1 ILS lens
1.8-2.6:1 ILS lens
2.6-4.1:1 ILS lens
4.1-6.9:1 ILS lens
6.9-10.4:1 ILS lens
Lens offsets
±120% Vertical
±54% Horizontal
ALL LENSES EXCEPT BELOW
0.67:1 (±22%V / ±6%H)
1.16-1.49:1 (±82%V / ±38%H)
Enhanced feature sets
99 channel memories
Black level blending
Auto setup
Digital keystone correction
3D upgradable
Dust sealed engine, filter-free design - Although the unit can be run without filters, Christie recommends using filters for assured performance
Menus in five languages
Power requirements
110-240 VAC 50/60 Hz operating voltage
15 A @100V operating current
1500W power consumption
5118 BTU/hr dissipation
Dimensions (LxWxH)
22.1 x 19.7 x 10.2"
561 x 500 x 259mm
Weight
55lbs (25kg) (without lens)
Operating environment
Temperature: 40 to 104° F (5 to 40° C)
Humidity: 20-80% non-condensing
Regulatory approvals
UL/CSA/IEC 60950 (3rd edition)
FCC Class A, CE, CCC
This product conforms to all relevant European directives, standards, safety, health and environmental concerns
RoHS, WEEE
14,062
Center lumens
13,500
ANSI lumens
12,500
Contrast ratio
10,000:1
Display type
0.96" 3DLP
Digital micromirror device
3DLP 0.96" DMD
Resolution
WUXGA (1920 x 1200)
Illumination type
Dual 450W lamp
Illumination performance (hrs)
Standard: 1750 hrs | Eco mode: 2000 hrs
Orientation
Portrait OR 360° vertically
Scan rates
Horizontal: 15 to 120 kHz / Vertical: 23.97 to 150 Hz
Pixel clock rate
165 MHz
Standard inputs
Twin DisplayPort input card
Dual-link DVI input card
3G SD/HD-SDI
Optional inputs
Dual-link DVI
Dual 3G SD/HD-SDI
Twin HDMI w/Active loop through
Twin DisplayPort input card
Dual-link DVI input card
3G SD/HD-SDI
Control & networking
RS232 in/out
RS422 in
Ethernet (10/100)
USB
GPIO (RS232 9-pin male connector)
Built-in backlit LCD keypad
Remote control (with optional wired XLR connection)
Optical systems
Dust sealed, 3-chip DMD light engine
Scheimpflug (tilt) adjustment
Motorized horizontal and vertical lens offset
Built-in light shutter
Tool-free lens insertion system
Fixed lenses
0.67:1 ILS lens
1.1:1 ILS lens
Zoom lenses
1.16-1.49:1 ILS lens
1.4-1.8:1 ILS lens
1.8-2.6:1 ILS lens
2.6-4.1:1 ILS lens
4.1-6.9:1 ILS lens
6.9-10.4:1 ILS lens
Lens offsets
±120% Vertical
±54% Horizontal
ALL LENSES EXCEPT BELOW
0.67:1 (±22%V / ±6%H)
1.16-1.49:1 (±82%V / ±38%H)
Enhanced feature sets
99 channel memories
Black level blending
Auto setup
Digital keystone correction
3D upgradable
Dust sealed engine, filter-free design - Although the unit can be run without filters, Christie recommends using filters for assured performance
Menus in five languages
Power requirements
110-240 VAC 50/60 Hz operating voltage
15 A @100V operating current
1500W power consumption
5118 BTU/hr dissipation
Dimensions (LxWxH)
22.1 x 19.7 x 10.2"
561 x 500 x 259mm
Weight
55lbs (25kg) (without lens)
Operating environment
Temperature: 40 to 104° F (5 to 40° C)
Humidity: 20-80% non-condensing
Regulatory approvals
UL/CSA/IEC 60950 (3rd edition)
FCC Class A, CE, CCC
This product conforms to all relevant European directives, standards, safety, health and environmental concerns
RoHS, WEEE