MIC/LINE INPUTS & OUTPUTS
6 inputs
6 outputs
Push-on mini-terminal block
Frequency Response: 20Hz – 22kHz @ +4dBu +/- 0.5dBu
Equivalent Input Noise (EIN): 20kHz BW, max gain, Rs = 150Ω, -126dBu
Dynamic Range: 20Hz – 20kHz @ 0dB, >105dB
Crosstalk (Mic/Line): Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, <-98dB
Input Impedance (Mic/Line balanced line to ground): 2.2kΩ, 1%
Nominal Input Level: Adjustable -56dB to 0dB, 7dB step coarse gain
Maximum Input Level: -65dBu to 20dBu
Phantom Power: Impedance: 6.81kΩ, 48V
Output Impedance (Mic/Line balanced): 95Ω, 1%
Output Level: 0dBu(Nominal), 20dBu (Max), -40dBu (Selectable)

DANTE™
Audio channels: Up to 256x256 bidirectional @ 48kHz per pair of primary & secondary Dante ports
Sample rate: 48kHz/96kHz
Primary & Secondary network: Gigabit Ethernet RJ45 connector
Expansion card: Up to additional 256 x 256 bidirectional @ 48kHz

EXPANSION BUS INPUT/OUTPUT
Proprietary Link In & Out ports: RJ45 Cat5e/Cat6 connection for Redundancy setup

OTHER PORTS
Ethernet: 10/100 Ethernet Network Port RJ45, auto negotiation
Serial: RS-232, DB9 Female, Serial Command Protocol Only, 9600/19200/38400/115200 Baud; 8 bits, 1 stop, no parity
USB: Type B connector, USB 2.0 compatible
Control/Status: DB25 Female, 8 Open Collector Outputs, 12 Active High Inputs, 5VDC Power Source
Device Identification: 8 pin DID switch

POWER
100-240V AC, 50/60 HZ, AC inlet

OPERATING TEMPERATURE
14°F/-10°C to 122°F/50°C

DIMENSION (W x D x H)
17” x 10.73” x 1.72”, 43.2cm x 27.3cm x 4.4cm

Share via